3720 Spruce St,

Philadelphia, PA 19104

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

3720 Spruce St,

Philadelphia, PA 19104

Commercial Pipe Lining & Bursting Service

Local Plumber-Commercial Pipe Lining & Bursting

Our Services

Premium Commercial Plumbing Services is Our Guarantee

Trusted & Experienced Services to look after your Commercial issues rapidly and completely so it doesn’t affect your business.

Pipe Lining System Capabilities:

  • Drain and sewage system pipelines of all types (including galvanized steel, cast/black iron, copper, and lead pipelines).

  • Insertion of part or entire areas.

  • Site repairs of joints and other structural problems.

  • Repair all typical pipe materials.

  • Sizes from 3 ″ to 10 ″.

  • Bends up to 90 degrees.

  • Blind ends.

  • Lengths up to 300 FT.

Proudly Serving All Philadelphia County, Pennsylvania

Spring Garden, Hawthorne, Society Hill, Francisville, University City, Schuylkill, Yorktown, Mantua, Ludlow, Fairmount

Retails Stores and Chains

Shopping Centers / Malls

Realty Management

Office Buildings

Hospitality / Hotels

Industrial / Factories

Schools / Colleges


Hospitals / Assisted Living


Some jobs are better left to the pros...

Get No-Commitment Estimates For Your Project in Philadelphia County, Pennsylvania


What Is Pipe Lining?

Pipe-lining is a no-dig option for repairing or replacing affected, broken, leaking, or clogged pipelines. Above all, it is essential to deal with this, especially with your business sewage system lines.


Due to the fact that it is a “no-dig” technique, expensive excavation and demolition are no longer needed. As a result, pipe-lining is less costly than conventional re-piping approaches such as excavations or open trench approaches.


Picture a smooth brand-new PVC pipe put within the original damaged pipe to best describe pipe-lining. The space between the old and brand-new pipelines is closed with an epoxy water resistant seal. As a result, despite the reduction of inner diameter, tests can prove an enhancement in original stream capacity.

How do I identify I need pipelining?

The damages are most likely currently underway if you own or handle a building that is more than 10 years old.


You will probably see or experience the following pipe rust symptoms:


  • Water with brown or redish colors
  • Spots on sinks
  • Leakages or odors
  • Poor water stream
  • Continuous sewage backups

What kinds of pipelines can be lined?

Lining can be done on commercial sewage system drainage pipelines from the commercial property to the mainline. Roofing system drainage pipelines, collectors, and business floor drainage pipelines can also be treated lining.

What are the advantages of pipe-lining?

Do not dig … recondition! Excavations can be very expensive in terms of work force, time, materials, permit costs, and damage expenses.


Pipe-lining does not interfere with a business day-to-day activities. It will not lose any earnings because of loud digging tools or even the need to segment off risky working areas. Plus, drainage activities will only be stopped for a short period of time during the job.

Is drain pipe lining good?

Lining sewage system pipelines can save up to 75% of the cost of replacing an old pipe with a brand-new one for commercial establishments.


The labor cost decreases considering that fewer hours are needed to perform the trench-less treatment. It is simply just the very best value amongst all repair work alternatives offered.

How much does it cost to reline a pipeline?

The cost of relining a damaged sewage system pipe varies from $80-250 per foot, with an average cost of approximately $160 per foot. Whereas, repair work rates for regular drain pipelines may vary from $4,000 to $20,000, depending on the circumstance.

What triggers pipe issues?

Tree Root Infiltration: Tree roots can typically enter and pierce drainage systems by means of fractures, connections, and pipelines. As a result, clogs and water loss will begin to take place.


Water: Gradually, water can break down, corrode, damage, and establish pinhole leaks in the system. ”Hard water” consisting of minerals can cause pipelines to get encrusted and blocked, resulting in obstructions.


Pipe wall surfaces collect water and “soft water” that may consist of acidic minerals can very easily liquefy and thin the pipe walls.


Plumbing Products: Without a doubt, metal piping systems made from copper or other galvanized metals present significant issues over time. Issues might take place in as little as 6 years.


But on average, a lot of copper and galvanized pipelines will start to corrode after 10 years. Pipe-lining is the ideal long-lasting solution to pipe deterioration.

What are the signs of a damaged drain pipe?

Here are the 10 most typical signs of a damaged sewage system pipe:


  • Sewage Backups and Blockages
  • Sewage System Gas Odor
  • Mold Issue
  • Slow Drain
  • Additional Green and Lush Patches in Sod
  • Imprint In Lawn or Under Pavers
  • Foundation Cracks, Settlement, and Sinkholes
  • Bug Invasion
  • Rodent Issues
  • Pooling Septic Waste

Is a sewage leak hazardous?

The most common  risk posed by a sewage leak are gases. Sewage can produce a vast array of gases, consisting of co2, methane, chlorine, nitrous oxide, hydrogen sulfide, and sulfur dioxide.


In high doses, hydrogen sulfide is dangerous and can cause queasiness, confusion, and even death.


If you believe or not sure that you could have a problem, call a professional plumber immediately.

the best solutions

Residential & Commercial Plumbing

24/7 Emergency Service

The Pipe Lining Process

Local Plumber-Commercial Pipe Lining Diagram

PREPARATION: To accomplish the very best results, the existing pipe must be well prepared. This consists of checking the pipe with a premium camera, cleaning the pipe, and finally measuring its diameter and length.


Massive repairs might need the interruption of water flow|streams through existing pipelines in order to prepare the pipe for lining.


SETUP (INVERSION): Installing a pipeline liner involves inserting the liner through drain clean-outs or small openings. In the case of partly broken drain areas, we just restore the damaged portion of the pipe’s opening.


The materials utilized for the liner are selected based upon the condition of the pipe. Whereas, straight pipelines use basic liner tubes, while pipelines with acute bends, angles, and shifts require more versatile tubes.

USING THE EPOXY: The epoxy is what holds the liner to the pipe wall. This bond forms a very tight fit, avoiding water from exiting the pipe or entering. After relining the pipe using a pipeline liner system, any internal deterioration or erosion stops right away. A lined pipe can no longer be permeated by roots.  When a pipeline is lined, it will be without root intrusions for the rest of its life.


CURING PROCESS: The epoxy and liner remedy in 4 to 12 hours. After the pipelines have actually been healed, service is restored.

What Is Pipe Bursting?

Pipeline bursting is a practice for replacing underground pipelines such as a sewage system or water pipes without making use of digging equipment or open trench approaches. Except for brand-new building, a lot of original U.S. drain drains and water lines have actually reached the end of their useful life and need to be updated or reconstructed. For decades, streets, walkways, landscaping, and even buildings have actually been built on top of these long-standing underground pipelines. The interruption brought on by open trench building can be substantial.


Layers of cement, asphalt, and landscaping need to be excavated and eliminated in order to expose the pipe and finally replace it.

Local Plumber-Commercial Pipe Bursting Diagram

The pipe bursting technique utilizes a cone-shaped bursting head that is slightly bigger at its base than the diameter of the existing damaged pipeline.


The bursting head is then attached to the replacement pipeline and fed into the shattered pipeline through an entryway hole.


The damaged pipe will begin to disintegrate as the replacement pipe goes through the existing pipe, thanks to the cone-shaped bursting head.


The pipe bursting service provider will then use a pull rod or hydraulic force to shatter the existing pipe and pull it out of its existing place.


It quickly fills the bursting head’s hollow due to the fact that the brand-new pipe is connected to the bursting head. You now have a brand-new pipe!

What are some advantages of pipe bursting?

Pipeline bursting is the just trenchless technique of replacement that allows the original pipe to be refitted. It might also enable you save money in the long run!

However, there are a number of other factors to think about pipe bursting:


  • Minimal landscape damage– Due to the fact that it just requires 2 openings, you won’t need to stress over your yard being turned up by excavation machinery.
  • Minimal downtime– There is no need to close or limit areas, leading to little downtime! It just takes a few hours to finish the procedure.
  • lower labor costs– Pipe bursting requires fewer hours and less labor to finish.
  • Less disruption There is no need for enormous, loud equipment to do the task!
  • Pipeline longevity You can replace the existing pipe with a more robust pipe to prevent having to repeat the procedure in a few months or years.
  • {Increased pipe flow You might note an increase in your wastewater flow if you use the trench-less sewage system technique.

Is pipe bursting safe?

Pipeline bursting is currently among the most safe and most affordable plumbing repair work approaches offered.

What kind of pipe is utilized for pipe bursting?

The most typically utilized replacement pipelines for pipe bursting applications have actually been high- and medium-density polyethylene (HDPE and MDPE).


The crucial advantages of PE pipe are its durability, resilience, sturdiness, toughness, longevity, flexibility, and its versatility.

For how long has pipe bursting been around?

Pipeline bursting was developed in the late 1970s in the UK by D. J. Ryan & Sons in collaboration with British Gas for replacing small-diameter, 3- and 4-inch cast iron gas mains.


This technique was patented in the UK in 1981 and later by the United States in 1986; both patents ended in April 2005.

Is pipe bursting really good?

When compared to regular sewage system repair work, pipe bursting is among the cleanest sewage system alternatives offered. Pipeline bursting has the least effect on the surrounding environment due to the fact that it eliminates the need to expose any roadways or landscaping.


This also stops potentially lethal toxins from entering your system.

Some jobs are better left to the pros...

Get No-Commitment Estimates For Your Project in Philadelphia County, Pennsylvania

Proud to Install, Repair, and Service the Following Brands: